If you are looking to clean almost any surface area at your home’s exterior, high-pressure cleaning is often the best and most affordable way to get it done. You can check-in at your local equipment rental shop to rent pressure cleaning equipment, but there are many benefits to hiring a professional pressure cleaning company.

Though there are benefits, but the question is – what is the cost of professional pressure cleaning in Melbourne?

Consider $150 (a ballpark figure) as the starting cost for the high-pressure cleaning for 1 – 30 square meters.

The truth is that, there are some factors that determine the actual cost of pressure cleaning in Melbourne.

Continue reading to discover more details, the cost and factors that affect the price.

How Much Does Pressure Cleaning Cost In Melbourne? 

High-pressure cleaning services have an average price of $45 per hour, and Queensland and Western Australia are the cheapest all over the country. The rate increases in New South Wales where hiring a pressure cleaning service costs $50 per hour.

Meanwhile, customers of pressure cleaning companies in Victoria are charged approximately $52.52 per hour. There are thousands of cleaning companies that can offer pressure cleaning services for you out there but their prices vary.

High-pressure cleaning companies in Melbourne charge an average rate of $50 per hour. However, you can prepare to get different prices as various factors impact the overall cost of the job. This implies that high-pressure cleaning prices can start from $40 per hour to $65 per hour.

How to Estimate Your Pressure Cleaning

It is not an easy task to estimate for your power washing jobs. There are numerous factors to note, such as local demand and competition. Cold weather climates might give rise to seasonal demand for pressure cleaning.

Power washers in places with much competition will require monitoring on the average prices.

Follow the five steps listed below to simplify the estimation of your pressure cleaning needs:

1. Measure the Space

Majority of pressure cleaning is estimated depending on the size of the area to be washed, whether in square footage or linear footage, according to professionals. Checking property in person before an estimate is sent is important to determine the conditions of the site personally. Make sure you identify the actual service you wants to be done and if there are any special services or repair work you need.

• Square Footage: Project estimates that are determined based on square footage include driveways, decks, parking lots, sidewalks, roofs, fences, siding, garage floors, and commercial cleaning. Find out square footage by calculating the length and width of the area. Make good use of a laser distance measurer. Find the product of the length by the width. Then use 1.35 to multiply that number to determine the approximate square footage.
• Linear Footage: Project estimates that are determined based on linear footage include houses and boats. You just measure the length of the building, leaving the width or thickness measurements. You can then base your charge on a linear foot. Linear feet are charged at an expensive rate than square footage.

Tip: If you know you are not experienced in this task, allow an expert to do it for you.

2. Choose a Pricing Strategy

Professionals normally estimate household jobs based on one of the three pricing techniques:

• Per square foot or linear foot
• Per hour
• Flat rate

Pricing by the square or linear foot makes it convenient to bid on various sizes and shapes of lots or structures. Hourly pricing ensures you are paid for each hour worked. Flat rate pricing is helpful if you have experience in pressure cleaning and already know the pricing for various jobs and how several factors the price.

Using this method, you have to determine the rough price depending on the square footage and then add your markup to it. More earning is made possible with flat-rate pricing but it requires an experienced professional to handle it correctly, as reported by the Houston Chronicle.

3. Price based on the Project

Service also impacts rates. Below are some standard rates based on the country’s average to assist you to estimate your pressure cleaning job, whether in the parking lot or a house.  

Houses

• $90  to $275 flat rate for exterior
• $0.75 to $1.25 per linear foot (one- story house)
• $1.75  to  $2.25 per linear foot (double- story house)

Gutters

• $100 for single story
• $135 for two floors
• $200 for three floors

Boats

• $5 per linear foot for just the bottom
• $10 per linear foot for the entire boat

Roofs

• $0.20 per square foot
• Double or trice the fee for roofs with sloppy pitches

Driveways and Sidewalks

• $60 to $150 flat price (based on size)
• $0.08 to $0.14/ square foot

Fences, Decks, and Siding

• $0.20 to $0.25/ square foot

Mobile Homes

• $50 to $85 flat rate: mobile home (based on condition)
• $80 to $100 flat rate: double wide (based on condition)

Commercial Cleaning

• $0.08 to $0.12/ square foot for basic surface cleaning
• $75 for standard dumpster & $150 for large

Garages, Parking Lots, and Drive Thrus

• $0.05 to $0.25/ square foot for parking lots and garage floors (based on condition)
• $10 to $20/ parking space

4. Estimate Materials and Overhead Costs

Extra costs include chemicals for jobs on decks, roofs, and siding. For instance, the cost of chemicals to power wash a roof is about $50. Prices will also vary based on the temperature of water (hot or cold) you use for cleaning.

Overhead is one other cost you should completely add in your estimates, according to Ultimate Washer. Let’s consider some monthly costs based on a 30-hour weekly work.

• Cleaning supplies: $400 or $3.33 for each hour
• Vehicle loan: $400 or $3.33 for each hour
• Car insurance: $125 or $1.04 for each hour
• Phone and internet: $150 or $1.25 for each  hour
• Gasoline: $500 per month or $4.17 for each hour
• Office rent: $900 a month, $9 for each hour (optional)
• Advertising: $600 or $5.00 an hour
• Equipment maintenance and fuel: $10 for each hour

Overhead costs are up to $40 per hour alone. You also need to add the company’s personnel salary (assuming $29 per hour at $60,000 per year) and money to save back into the company (say $20,000 or $9.50 per hour). This moves up your rate to $78.50 per hour.

5. Find the Total

Now that you’ve measured your square or linear footage, use the standard rates for the job to calculate the cost, ensuring that materials and overhead are accounted for. Or make use of one of the standard rates mentioned above.

You may consider this other method:

Multiply the cost of materials by 2 and add it to the cost of cold or hot cleaning water to get the project estimate. Coldwater cleaning costs should be around $45 – $50 and hot water cleaning costs should fall between $55 and $60.    

Reason for Hiring a Professional Pressure Cleaning Service

Assuming you are planning a DIY pressure cleaning job, you may have to spend about $40 per day to rent a pressure washer. But remember that it can consume much time to get even a small spot cleaned, which is why it is more reasonable to hire a professional cleaner. And that will also save you time. Pressure cleaning exactly involves a huge deal of skill than ordinary.

Different surfaces need different water pressures and cleaning methods. What might be effective on grimy concrete driveways, for example, may remove paint off of your surface. Professionals will have the right method in place and also highly powerful equipment ready at your local stores. Alongside water pressure, cleaning agents are applied in pressure cleaning.

Here, also, the cleaning agents you choose and the application methods can make a significant difference in how effective the cleaning job and the wrong selection of cleaning agents can do permanent environmental damage. It is popular, for instance, for a do-it-yourself pressure cleaning job to be completed, but a brown lawn that’s been destroyed by a harsh cleaning agent may leave you regret.

What are the Equipment used for Pressure Cleaning?

A pressure cleaning will make use of some important equipment used to complete the job properly. The equipment they use will be based on the area they are cleaning. For example, cleaning a driveway always needs:

• High PSI pressure machine, usually petrol-based
• Special detergent or cleaning products
• Broom and brush
• Gloves
• Protective sheeting to prevent damage to other items and garden
• Painting tape
• A long garden hose
• Concrete or paver sealer

What is the Cost to Pressure Clean per Square Foot?

Similar to other trade experts, pressure cleaning companies determine their rates by their time and materials, including a profit margin to that. Usually, they charge by square meter with varieties of charges applied to different surfaces.

They’ve learned from their experience that some surfaces need more care and time than others and they charge based on that. Pressure cleaning costs can be tricky, because the company may charge the expensive costs to clean 10 square meters as it charges 30-sqm. This is because travel and set-up times are included in the total costs.

As the job gets complicated, the cost of pressure cleaning reduces greatly. Expect a general quote to be around:

• $150 for 1to 30 square meters
• $180 for 40 square meters
• $200 for 50 square meters
• $325 for 100 square meters

The price is also determined by the area to be cleaned. Consider this rough estimate as the cost to pay:

• $200 for a driveway
• $150 for patio paving
• $350 for the outside of your home

As regards roof cleaning, many factors can affect your quotes, such as the pitch and the size of the roof. The price of high-pressure roof cleaning ranges from $2/square meter for metal or concrete tile roofing. Don’t forget that some cleaners will charge an hourly rate, with about $40 per hour as the average rate.

What Is The Hourly Cost Of Pressure Washing? 

Pressure washing often costs between $60 – $100 per hour as revealed on Fixr.com. For instance, pressure washing a 1,200 square foot home will take around 6 hours and it cost around $360 to $600. Pressure washing a sidewalk or driveway would take one hour ($60 – $100), a roof requires 2 – 3 hours ($120 – $300), and porches, decks, and patios take around 1 – 2 hours ($60 – $200).

Obtaining Quotes from High-Pressure Cleaning Companies

To obtain a clear understanding of pressure cleaning, always collect a minimum of 3 quotes. To get a more advanced value for money, if other services are needed, such as the application of sealing to your driveway after pressure washing it, go with a company that offers the two services.

 

FAQs about Pressure Cleaning:

1. What is the average hourly cost of pressure cleaning in Melbourne?
   Pressure cleaning rates in Melbourne typically range from $40 to $65 per hour, depending on the service and area.
2. How much does it cost to pressure clean a driveway?
   Prices start from $200, varying based on the size and condition of the surface.
3. Are there different rates for residential and commercial pressure cleaning?
   Yes, commercial cleaning may have higher rates due to specialised equipment and safety protocols.
4. What factors influence the cost of pressure cleaning services?Surface type, size, accessibility, and additional treatments like sealing impact the overall price.
5. Is it cheaper to hire a professional or rent equipment for DIY pressure cleaning?
   While DIY rental starts at $40 per day, professionals offer expertise, saving time and reducing damage risks.
6. How are pressure cleaning costs calculated per square meter?
   Costs range from $2 per square meter for simple surfaces to higher rates for complex jobs like roofs.
7. What is the estimated cost for pressure cleaning a patio?
   Patio cleaning usually starts at $150, depending on the material and area size.
8. How often should pressure cleaning be scheduled for commercial properties?
   Regular cleaning every 6-12 months is recommended to maintain appearance and safety.
9. Are eco-friendly cleaning solutions available for pressure washing?
   Yes, many services offer environmentally safe products to protect both property and the environment.
10. Can pressure cleaning services be customised for different surfaces?
    Professional companies adjust techniques and equipment to suit surfaces like concrete, wood, and tiles.

For more information about pressure cleaning, don’t hesitate contact us!